Universal Red/Green/Blue (RGB) LED controller and dimmer with handheld infrared remote that can control any 12VDC RGB LED products except the RGB-2. Select from 20 static modes, custom color programming, or 6 dynamic color-changing modes with speed and ON/OFF controls. The maximum load is 3 amps per channel, 18 amps total.
LDIR-RGB3: 12VDC RGB LED Controller
The model LDIR-RGB3 is a RGB controller with handheld Infrared Remote that can be used to program custom colors, control and dim any of our Red/Green/Blue (RGB) LED Light Bars and Light Strips. Several different static colors (including pure white) and dynamic color changing modes are directly selectable and adjustable on the IR remote. Up to six different custom colors can be programmed and saved on the six DIY buttons for direct selection.
Applications: Specific color selection, custom color programming, or color change with speed control modes and dimming capabilities for accent lighting
Function: Program and save cutom colors, dynamic color changing, dim and control 3 channel RGB LED products from 0~100% using PWM with remote
Operating Voltage: 5~24 Volts DC
Connection Mode: Common anode (+)
Output: (2x) 3 channel RGB wire
Maximum Load Current: 3 Amps/channel (18 Amps total)
Output Power: 216W @ 12V / 432W @ 24V
Overall Size: (L)127 X (W)52 X (H)19 mm
Control Method: Wireless IR remote control
Batteries Required: CR2025 battery for remote (included)
Modes: 32 total (26 static and 6 dynamic)
Operating Temperature: -25~60°C
Typical Wiring Schematic
1.) Only power with 5~24VDC power supply.
2.) Wireless controller uses one CR2025 battery.
3.) Connect according to the drawing below.
5.) QUICK and SLOW speed buttons will only work when unit is in one of the color changing (dynamic) modes.
6.) Each Controller has a handheld Remote matched to it and will only work with it's matched remote. One remote cannot operate multiple controllers.
7.) Controller can control a maximum of 48 meters of our Flexible RGB LED Strip. Over 48 meters, the strips have to connect with an amplifier to reinforce the transmission of signal. Use one RGB Amplifier for every 30 meters of additional LED Strips.
8.) Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.
IR Programmable Remote Control
Write a Review:
Tell us what you think about RGB Controller with IR Remote, share your opinion with other people. Please make sure that your review focus on RGB Controller with IR Remote. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
Have any question or inquire for RGB Controller with IR Remote? Please contact
Customer Service. (Our customer representative will get back
Did you find what you were looking for?
If you need help or have other feedback for Customer Service. Click here
Recently Sold items
LED Strip , LED Controller , Flexible LED Strip , LED Dimmer , LED Strip Lights , LED Light Bar , LED Power Supply , LED Lights , LED Ribbon , LED Car Light
© 2005-2012 LEDStripHome Copyright, All Rights Reserved.